Compare Models

Choose up to 3 models below to get comparison chart.

Bay Series 260 LTS Pro
 
Specifications
  • Length - 25'5"
  • Beam - 8'6"
  • Recommended Horsepower Range - 250-400
  • Approximate Hull Weight - 2650 lbs.
  • Transom Height - 25 in
  • Deadrise - 15 degree
  • Approximate Draft - 13 in
  • Approximate Bridge Clearance - 8'2"
 
Hull & Deck
  • 1- 6" Pull Up Cleat at Bow
  • 6 - 6" Thru-Bolted Stainless Steel Pull Up Cleats
  • 4 - Flush Mount Stainless Steel Rod Holders (Rear Gunwales)
  • 316 L Stainless Steel Hardware
  • 1/2 Swim Platform w/ Fold- down Ladder
  • Aluminum Backing Plates Glassed in for Seats, Cleats, Rails, Rod Holders & Tops
  • Anchor Locker
  • Anchor Tie-Off
  • Finished Fiberglass Lids
  • High Impact Rub Rail
  • High Speed Pick-Ups w/Shut Offs for Washdown and Livewells
  • Stainless Steel Grab Rails
  • Stainless Steel Thru Hull Fittings with Reinforced Hose
  • Non-Skid Resistant Casting Deck Surfaces & Gunwales
  • 4" Hydraulic Jackplate
  • Port Side Rod Tubes
  • Colored Hull Side Panel
  • Bow Trim Switch
  • Custom Stainless Steel Transom Cap
  • Easy Access Bilge Compartment with Fiberglass Lid
  • Stainless Steel Lid Pistons
 
Console / Helm Area
  • Custom Fiberglass Console with large easy access door and matching 2-tone paint
  • Edson Polished Stainless Steel Steering Wheel w/ Power Knob
  • 10 Stainless Steel Vertical Console Rod Holders
  • USB Port located in Console Storage Box
  • Custom Recessed Footrest in Console with Storage box and Easy Access to Master Battery Switch
  • Yeti Tundra 65 with Custom Cushion located in front of console
  • Yeti Tundra 65 with Custom Triton Seadek pad and mounted on a custom Cooler Slide under Leaning Post
  • Color Matched Console and Custom Fiberglass Leaning Post
  • LTS Pro Fiberglass Leaning Post with Custom Flip Up Bolster Seating and Backrest with (4) Rod Holders and Stainless Steel Grab Rail
  • 12 Volt Accessory Plug
  • Custom Aft Bench Seat Cushion
  • Electric Horn
  • Full Instrumentation
  • JBL AM/FM, Bluetooth, and MP3 Port w/ (4) Speakers
  • Plexiglass Windshield
  • Stainless Steel Console Grab Rail
  • Tilt Steering
  • Edson Stainless Steel Cup Holder
 
Cockpit
  • 624 qts of Total Storage /Fish Box with Macerator Pump-out
  • 4 - Horizontal Rod Racks
  • 2 - Lockable Bow Storage Lockers - Rod Storage - Port and Starboard
  • 60 gal. Transom Livewell with LED Light, 800 gph Aeration Pump and 800 gph Recirculation Pump
  • Courtesy Lights ( LED)
  • Deck Cover Boards
  • LED Lights for Release Well, Bait Well, and Compartment Light Package
  • Raw Water Washdown Station Conveniently Located inside Front Deck Step Compartment
  • Removeable Rear Deck Backrest with Custom Seat Cushion
  • Stainless Steel Lid-Latches with Stainless Steel Striker Plates
  • Self-bailing Cockpit with Non- Skid
  • Voyager Compass
 
Boat Systems
  • 4 gpm Raw Water Washdown Pump
  • 60 gal. Aerated Live/ Release Well w/ 1100 gph Aerator Pump and 800 gph Recirc Pump
  • 25 gal. Baitwell w/800 gph Aerator & 800 gph Recirculation pumps
  • 2- 1500gph bilge pumps (1 Auto & 1 Manual)
  • 6 Gauge Trolling Motor Wiring Harness
  • Battery Switch
  • Circuit Breaker Protected Wiring
  • Electric Trim Tabs w/ Indicators
  • LED Navigation lights and Bow Lights Flush Mounted in Deck
  • Outboard Motor Factory Installed
  • Stainless Steel Prop
  • Cranking Battery with Tray
  • Military Spec. Waterproof Switches with Waterproof Stainless Steel Blue LED Indicator Lights
 
Construction
  • Limited Lifetime Hull Warranty
  • 3 Year Ltd. Component Warranty
  • 100% Composite Uni-body Construction-No Wood!
  • 100% Hand-Laid Hull
  • Basic Floatation
  • Full Width Tri-Core Composite Transom
  • Plumbing Systems Tank Tested
  • Premium Gelcoat w/ UV Inhibitors
  • Zero Flex Fully Foamed Stringer Grid System
 
Options